Salt in tablets for descaling 25kg
9,92 € VAT incl. 20%
Calculate your shipping costs
Select zone and quantity
Table of Contents
- Its chemical characteristics are identical to those of the cylindrical pad.
- Less compaction than cylindrical pad.
Salt control in swimming pools
It is very important that the concentration does not drop, so that the salt chlorinator works correctly. The salt does not evaporate, but it can lower its concentration if you do a lot of backwashing of the filter (more frequent in areas with trees). Add salt in the proportion recommended by the manufacturer of your chlorinator for cases where you need to compensate for the salinity. If, on the other hand, the salt nivel is too high, empty the pool slightly and add new water. In any case, if the lack or excess of salt is repeated, it may happen that you do not have the salt chlorinator working for the right time and at the right power or that it has a problem.
An easy formula to calculate the amount of salt we have to add to the pool is this: we multiply the cubic meters of the pool by the grams of salt/liter that we have to add and we get the kilos of salt to add. For example: 40m3 x 2gr = 80kg. of salt
pH control as a daily maintenance task for a saltwater pool
In pools with salt chlorinator it is very important to measure the pH of the water every morning, since salt chlorination usually raises it. The pH must be close to 7.2 for it to be comfortable and for the good condition of the technical water control devices and the pool elements themselves.
- If the pH is low, i.e. the water is acidic, the electrode of the salt chlorinator deteriorates more quickly (any metal element that is in contact with the water), the chlorine vapour increases and people's skin and eyes are irritated. The solution is to add lifting fluid (pH+).
- If the pH is high, the disinfectant loses its effectiveness and more is consumed, algae proliferate, and the skin and mucous membranes are also irritated. The solution is to add reducing fluid (pH–).
What is salt electrolysis?
Salt electrolysis is the process of disinfecting water using natural salt and not chemical chlorine.
It is one of the most popular disinfection methods for pool water treatment in recent years, both for the quality of the water, as well as for the ease of maintenance, as well as for the absence of handling of chemical elements.
The chlorination cell uses the electrolysis process by which the salt (NaCl) is transformed into sodium hypochlorite (NaClO) dissolved in water, which is a powerful disinfectant that destroys practically all the microorganisms that our pool water may have.
The cell will automatically generate the free chlorine needed for your pool and without the need to add anything other than salt to the water.
How much initial salt is adequate? Approximately 5 kg per cubic metre, or 5 grams per litre.
What to do with salt pools in heat waves?
The use of swimming pools in these periods of extreme heat is higher and consequently chlorine consumption is higher.
Specifically in pools with salt equipment and pH pump, the recommendations are:
- Increase the number of operating hours to 8 or 10 hours depending on the case, always at hot hours and when we have bathers in the water.
- Increase the production of the team, (if the increase in hours is not enough). Normally, the team works or is sized to work at 75%, increase to 90 or 100%.
- There is the possibility of providing stabilizing water with a concentration of no more than 40 ppm, so that the chlorine generated by the salt equipment is more stable in the water.
- And as a more valid or recommended option, after a very hot day and with many bathers, if the water requires it, because it is brownish or somewhat cloudy, use 55% granulated Dichloro.
This product, in a matter of 2 or 3 hours, leaves the water impeccable and suitable for bathing the next day. It does not affect the pH, eliminates possible chloramines in the water and kills algae that may have proliferated.
If the pool is tile, we can distribute it directly to the pool water. And if it is made of Polyester, liner or painted, previously dilute it in water, before distributing it throughout the pool.
Product | Salt in tablets for descaling 25kg |
Brand / Manufacturer | Salinera española |
Weight (kg) | 25 |